Precision-drawn titanium wire produced to tight diameter tolerances and consistent surface finishes — supplied in coils, straightened cut lengths or wound on spools, depending on your downstream process.
Titanium wire is manufactured by cold drawing through a series of precision dies to achieve the required final diameter, with intermediate annealing to restore ductility and control tensile properties. Feinuotai supplies Commercially Pure Titanium Wire (Grade 1, 2) for general-purpose use and Titanium Alloy Wire (Grade 5 Ti-6Al-4V, Grade 7, Grade 23 Ti-6Al-4V ELI) for higher tensile strength or specific corrosion requirements. All five grades are available from stock. Specific diameter, tolerance class, surface condition and packaging format — coils vs. straightened cut lengths vs. plastic or metal spools — are all confirmed per inquiry.
Titanium wire serves a surprisingly broad range of end uses: as GTAW (TIG) and GMAW (MIG) welding filler metal for titanium structures; as the feedstock for weaving welded or woven titanium mesh; as spring wire for high-ratio strength-to-weight applications; and in some medical and electrical components where biocompatibility and corrosion resistance are both required. Note that components intended for medical device use are subject to applicable regulatory requirements, which should be confirmed at the inquiry stage.
Three supply formats covering the most common downstream processes.
Continuously drawn wire wound into loose coils for rewinding or further processing.
Cold-straightened and cut to fixed lengths — often used as welding filler or pin stock.
Precision-layered wire wound on plastic or metal spools for automated feeding.
Filler wire for GTAW (TIG) and GMAW (MIG) welding of titanium structures.
Feedstock for woven or welded titanium mesh used in filtration and electrodes.
High-ratio strength-to-weight wire for springs, clips and small formed components.
Biocompatible and corrosion-resistant wire for electrodes, leads and surgical devices.
Let us know the material grade, wire diameter, tolerance requirements, surface condition, required quantity, and your application and applicable standards — we will confirm availability and lead time.
Send Inquiry
